Endress+Hauser Solicap M FTI56 - Wiring in Housing F16, F15, F17, F13

Wiring Solicap M FTI55, FTI56
38 Endress+Hauser
4.2 Wiring in housing F16, F15, F17, F13
To connect the electronic insert to the power supply, proceed as follows:
a. Unscrew the housing cover (1).
b. Remove the cable gland (2) and insert the cable (3).
BA300Fxx013
!
Note!
• Information on the procedure for connecting shielded cables is provided in TI241 "EMC test
procedures".
• All further steps depend on the specific electronic inserts used, which are described on the
following pages:
FEI51  ä 41
FEI52  ä 42
FEI53  ä 43
FEI54  ä 44
FEI55  ä 45
FEI57S  ä 46
FEI58  ä 47
1.
a. b.
2.
3.
–
+
FEI55
8/16mA
11...36V DC
–
+
7
3
I=16mA
5
12