Endress+Hauser Solicap M FTI56 - Probe Without Active Buildup Compensation

Solicap M FTI55, FTI56 Installation
Endress+Hauser 31
!
Note!
• Connecting cable: ø10.5 mm
• Outer jacket: silicone, notch resistance
3.12 Probe without active buildup compensation
BA300Fen009
H4 62 - - -
Polyester housing F16 Stainless steel housing F15 Aluminum housing F17
GN/YE
YE
RD
1. Pressing screw
2. Insert seal
3. Cabel gland
4. Heatshrinking sleeve
5. Seal
6. Adapter disk
7. Seal
8. Plug M3
9. Split washer
10. Strand yellow/green (YE/GN) with ring terminal
11. Strand yellow (YE) insulated with a heatshrinking
sleeve
12. Snap ring
13. Nut M4
14. Split washer
15. Strand red (RD) with ring terminal
insulated with a heatshringking sleeve
16. Blade plug
17. Adapter bushing
19. Process connection
21. Strand black (BK)
(not required)
23. Strand yellow/green (YE/GN)
with a ring terminal
(protective earth)
25. Solder the strand
with the central core of the
coaxial cable (probe)
red (RD)
24. Isolate strand
with heatshringking sleeve
yellow (YE)
20. External screening
(not required)
22. Coaxial cable with
nd
central core
a screening
18. O - Ring