Endress+Hauser Solicap M FTI56 - Probe with Active Buildup Compensation

Solicap M FTI55, FTI56 Installation
Endress+Hauser 33
3.13 Probe with active buildup compensation
BA300Fen009
GN/YE
YE
RD
1. Pressing screw
2. Insert seal
3. Cabel gland
4. Heatshrinking sleeve
5. Seal
6. Adapter disk
7. Seal
8. Plug M3
9. Split washer
10. Strand yellow/green (YE/GN) with ring terminal
11. Strand yellow (YE) soldered with the guard
strand insulated with a heatshrinking sleeve
12. Snap ring
13. Nut M4
14. Split washer
15. Strand red (RD) with ring terminal
insulated with a heatshringking sleeve
16. Blade plug
18. Adapter bushing
20. Process connection
22. Strand black (BK)
(not required)
24. Strand yellow/green (YE/GN)
with a ring terminal
(protective earth)
26. Solder the strand
with the central core of the
coaxial cable (probe)
red (RD)
25. Solder the strand
with the strand (RD)
from the tube.
yellow (YE)
guard
21. External screening
(not required)
23. Coaxial cable with
nd
central core
a screening
17. Guard strand (RD)
19. O - Ring