EnGenius EAP900H - Page 13

13
4. Select Internet Protocol Version 4 (TCP/IPv4) and then
select Properties.
5. Select Use the following IP address and enter an IP
address that is different from the EAP900H and Subnet
mask,thenclickOK.
Note: Ensure that the IP address and Subnet mask are
on the same subnet as the device.
Forexample:EAP900HIPaddress:192.168.1.1
 PCIPaddress:192.168.1.2–192.168.1.255
 PCSubnetmask:255.255.255.0