Engine distributors WSG-1068 - Page 119

103

WSG-1068 ENGINE
14. Remove the bolts, and remove the flywheel.
15. Use the Rear Crankshaft Slinger Remover and the
Impact Slide Hammer to remove the crankshaft oil
slinger (6310).
16. Use the Rear Crankshaft Seal Remover and the
Impact Slide Hammer to remove the crankshaft rear
oil seal (6701).
17. Remove the bolts and remove the crankshaft rear oil
seal retainer plate.
18. Mount the engine on an engine stand.
19. Remove the Modular Lifting Bar.