Engine distributors WSG-1068 - Inspection and Verification

7

WSG-1068 GENERAL INFORMATION
Inspection and Verification
1. Verify the customer concern by operating the engine to duplicate the condition.
2. Visually inspect for obvious signs of mechanical and electrical damage:
 Engine coolant leaks.
 Engine oil leaks.
 Fuel leaks.
 Damaged or severely worn pads.
 Loose mounting bolts, studs, and nuts.
3. If the inspection reveals obvious concerns that can be readily identified, repair as required.
4. If the concerns remain after the inspection, determine the symptoms and go to the symptom
chart.