28
WSG-1068 GENERAL INFORMATION
6. Tighten the tapersert into the spark plug hole.
7. Turn the mandrel body approximately one-half
turn counterclockwise and remove.
Exhaust Manifold Straightness
Special Tool(s)
Place the Straightedge across the exhaust
manifold flanges and check for warping with a
feeler gauge.
NOTE: The exhaust manifold shown is a typical exhaust
manifold.
SPECIFICATIONS
NOTE: Ford Power Products industrial engines are
designed to perform with engine oils that are licensed
by the American Petroleum Institute (API), and oils
carrying the most current API classification should be
used.
:
To Next Page
Loading...