Engine distributors WSG-1068 - Crankshaft Main Bearing Journal Diameter; Crankshaft Main Bearing Journal Taper

11

WSG-1068 GENERAL INFORMATION
Crankshaft Main Bearing Journal Diameter
 Measure each of the crankshaft main bearing
journal diameters in at least two directions.
 If it is out of specification, replace as necessary.
Crankshaft Main Bearing Journal Taper
 Measure each of the crankshaft main bearing
journal diameters in at least two directions at
each end of the main bearing journal.
 If it is out of specifications, replace as
necessary.