146
WSG-1068 ENGINE
54.
CAUTION: Mating parts must make contact
to each other within 4 minutes and connecting bolts
must be torqued within 15 minutes after applying
sealant. Failure to follow this procedure can cause
future oil leakage.
Use silicone gasket and sealant F6AZ-19562-AA
or equivalent meeting Ford specification WSEM4G323-
A6.
NOTE: Sealant must be removed and area cleaned
with solvent if above instructions are not followed.
Use metal surface cleaner F4AZ-19A536-RA or
equivalent meeting Ford specification WSEM5B292-
A.
NOTE: The RH timing chain is removed for clarity.
Apply a bead of silicone along the cylinder headto-
block surface and the oil pan-to-cylinder block
surface as specified.
55. Install a new engine front cover gasket (6020) onto
the engine front cover (6019), then position the engine
front cover on the front cover to cylinder block dowel
(6C002).
To Next Page
Loading...
