194
WSG-1068 COOLING SYSTEM
CAUTION: The coolant must be recovered in
a suitable, clean container for reuse. If the coolant
is contaminated it must be recycled or disposed of
properly.
NOTE: About 80% of coolant capacity can be recovered
with the engine in the vehicle. Dirty, rusty or
contaminated coolant requires replacement.
3. Place a suitable container below the radiator
draincock (8115). If equipped, disconnect the
coolant return hose at the fluid cooler.
4. Open the radiator draincock.
5. Remove the cylinder drain plug, if equipped, to
drain the coolant from the cylinder block (6010).
1. Place a drain pan below the cylinder block.
2. Remove the drain plugs.
To Next Page
Loading...
