EasyManuals Logo

enphase IQ Combiner 5C Quick Install Guide

enphase IQ Combiner 5C
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Section D
Installing the
current transformers
1. Production metering
The IQGateway printed circuit board inside the
IQCombiner5/5C is pre-wired at the terminal blocks for
power and production metering connections.
One solid-core current transformer (CT) is used for revenue
-grade production metering.
2. Consumption metering
Two clamp-style current transformers (CT) are provided with
the IQCombiner5/5C for consumption metering.
The CTs are installed in the main load center for grid-tied
systems and in the IQSystemController for grid-forming
systems.
3. IQBattery metering
One clamp-style current transformer (CT) is provided with the
IQCombiner5/5C for IQBattery 5P metering.
The CTs are installed in the IQCombiner5/5C for grid-tied
systems and in the IQSystemController for grid-forming
systems.
IQ Combiner 5/5C Quick Install Guide 32

Other manuals for enphase IQ Combiner 5C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the enphase IQ Combiner 5C and is the answer not in the manual?

enphase IQ Combiner 5C Specifications

General IconGeneral
Brandenphase
ModelIQ Combiner 5C
CategoryInverter
LanguageEnglish

Related product manuals