Enraf Nonius 6 Series - Operating Instructions; Operator Controls

40
1600751-4D
10.4 EMG
10.4.1 Connections
E1 : EMG channel 1
REF : Reference cable
E2 : EMG channel 2
P : Pressure channel
Headphone connector, (backside of the unit) for
the raw EMG signal
The connection with the MyoComBox is wireless
via Bluetooth. This is only possible if the X
module is integrated.
!CAUTION
• Connection of accessories other than the ones specified by the manufacturer can
adversely affect the safety of the patient and correct functioning of the equipment, and is
therefore not permitted.