1600751-4D
notch filter to 60 Hz if the power supply frequency is 60 Hz. The default is 50 Hz (this is the
power supply frequency in most countries). It is also possible to completely turn off this filter, but
we do not recommend this.
11.2.10.b Exporting Reports and Measuring Data
Prepare your USB memory stick for use on your computer. Create the files in which you wish to
save the export. We recommend that you name the folder the same name as the name of the
patient.
Insert your USB memory stick into the MyoComBox.
Once the measurement has been completed the data can be exported from the MyoComBox to
the USB memory stick. To do this go to the analysis screen, press on the orange “Assist” key
and select “Save.” Then select the file from which you want to write the data to the USB memory
stick.
When you then insert this USB memory stick into your computer you can open the data files.
You can import them as a .txt file (text file with tab-separated data) or create a report from the
data with the aid of the MyoComBox Data Viewer by Enraf-Nonius (article number1600840). It is
easy to make a standard report with this program; in addition, up to five measuring sessions can
be compared. The program can be downloaded from www.enraf-nonius.com.
11.2.10.c Sensitivity setting
• Using the central
controller [5], to select
Sensitivity and push
the confirmation button
[6].
To Next Page
Loading...
Need help?
General
