Entes MPR-45S - Page 59

59
5.2.15.4. Resetting Maximum Demand Values
1. Select Maximum Demand from the Reset menu and press the SET button.
2. Press the SET button while “Reset DE” is displayed and select YES option with UP/DOWN
buttons.
3. Complete the entry with the SET button.
5.2.15.5. Resetting Energy Values
1. Select Energy recordings from the Reset menu and press the SET button.
2. In the Reset Energy section that appears on the screen, select the Yes option for the reset
process by using the UP/DOWN buttons.
3. Complete the entry with the SET button.
.
5.2.15.6. Resetting Generator Energy
1. Select Gen Enrg recordings from the Reset menu and press the SET button.
2. In the Reset GenE section that appears on the screen, select the Yes option for the reset
process by using the UP/DOWN buttons.
3. Complete the entry with the SET button.