Entes MPR-45S - Page 67

67
5.2.17.7. Analog Output-2 High Value Settings
1. Press the SET button while Analog O-2 HIGH is displayed.
2. The selected option starts to blink.
3. Enter your high value with UP/DOWN buttons.
4. After entering your value, press the SET button.
5. When exiting from the menu with the BACK or ESC button, don’t forget to save the changes.
5.2.17.8. Analog Output-2 Low Value Settings
1. Press the SET button while Analog O- LOV is displayed.
2. The selected option starts to blink.
3. Enter your low values with UP/DOWN buttons.
4. After entering your value, press the SET button.
5. When exiting from the menu with BACK or ESC button.