EN-16 Installation and Operating Instructions - EOS Compact DC/HC
EN Identification
2.5 Accessories
An additional output controller must be connected if the heater output is
above 10 kW or the phase load is above 16 A and an output of over 3 kW is
drawn at the vaporiser.
Output controller (LSG) Item no.
LSG 18 94.5730
LSG 18 H 94.5731
LSG 36 94.4392
LSG 36 H 94.5921
EmoTec L09 R 94.4998
Add-on modules Item no.
SBM remote start 94.5782
SBM-HOT 94.6800
SBM-ECO 94.6980
SBM-GLT-KNX 94.7078
SBM-GLT-Mod 94.7077
Sensors Item no.
Temperature sensor (beige) 94.7438
Additional safety temperature limiter housing (beige) 94.7443
Temperature sensor (anthracite) 94.7437
Additional safety temperature limiter housing (anthracite) 94.7444
Bench sensor (beige) 94.7439
Bench sensor (anthracite) 94.7440
Multisensor (beige) 94.7441
Multisensor (anthracite) 94.7442
Connecting cables for add-on modules Item no.
Connecting cable 6P6PC 10 m 94.5861
Connecting cable 6P6PC 25 m 94.4647
Connecting cable 6P6PC 50 m 94.4648
To Next Page
Loading...
Need help?
General
