EOS Compact DC/HC - Installation and Operating Instructions EN-3
Contents
Documentation..................................................................................................EN-2
1 General safety instructions ..........................................................................EN-6
1.1 Safety levels................................................................................................EN-6
1.2 Mounting and electrical installation .................................................EN-6
1.3 Operator instruction................................................................................EN-9
1.4 Standards and regulations................................................................. EN-11
2 Identification.................................................................................................... EN-12
2.1 Scope of delivery ................................................................................... EN-12
2.2 Nameplate ............................................................................................... EN-13
2.3 Sensors...................................................................................................... EN-13
2.4 Technical data ........................................................................................ EN-14
2.5 Accessories .............................................................................................. EN-16
2.6 Intended use ........................................................................................... EN-17
3Installation........................................................................................................ EN-18
3.1 Routing the lines.................................................................................... EN-18
3.2 Installation site ....................................................................................... EN-19
3.3 Mounting the control unit ................................................................. EN-22
3.4 Mounting the heater sensor.............................................................. EN-30
3.5 Mounting the multisensor (optional) ............................................ EN-34
3.6 Mounting the bench sensor (optional) ......................................... EN-36
3.7 Mounting the cabin lighting............................................................. EN-36
3.8 Mounting the fan .................................................................................. EN-37
4 Connecting the lines..................................................................................... EN-38
4.1 Circuit board assignment for EOS Compact HC......................... EN-40
4.2 Circuit board assignment for EOS Compact DC......................... EN-41
4.3 Connecting the sensor cables .......................................................... EN-42
4.4 Connecting optional modules.......................................................... EN-44
4.5 Connecting the consumer lines....................................................... EN-45
4.6 Potential-free contact.......................................................................... EN-53
4.7 Checking for proper installation of the vaporiser ..................... EN-54
To Next Page
Loading...
