EOS Compact DC/HC - Installation and Operating Instructions EN-77
Operation
Displaying the temperature values
1 Press the Up button for 2 seconds.
The actual values from the connected sensors are displayed for
approx. 4 seconds.
The actual value for humidity is displayed only if a humidity sensor is
connected.
6.7.12 Switching the PFC on/off manually
The icon for the potential-free contact (PFC) is displayed in the main menu
only if the PFC function in the service menu is set to manual (setting 2).
See: 5.3 PFC function, EN-58.
The PFC cannot be switched on/off manually in the holiday resort or
remote modes. See: 6.8.3 Modes – holiday cottage, holiday resort,
remote, EN-79.
Switching the PFC on/off
1 Choose the PFC soft key.
6.7.13 Switching the fan on/off manually
You can switch the fan on and off manually.
If you switch on the fan during the heating process, it is switched off
automatically when the heating process ends.
If you switch on the fan when the sauna cabin is in standby mode, it is
switched off automatically after 30 min.
You can set one function for the fan for Bi-O mode (humidity mode). It can
be overridden through manual intervention.
See: 5.4 Fan function, EN-59.
The fan cannot be switched on/off manually in the holiday resort or remote
modes. See: 6.8.3 Modes – holiday cottage, holiday resort, remote,
EN-79.
To Next Page
Loading...
Need help?
General
