EOS 94 00 Series User Manual

EOS Compact DC/HC - Installation and Operating Instructions EN-43
Connecting the lines
 Connecting the sensor cables
1 Connect the heater sensor:
a) Connect the cable for the temperature sensor from the heater sensor
to the two Oven Sens. terminals.
b) Connect the cable for the safety temperature limiter from the heater
sensor to the two STB terminals on the lower main circuit board.
2 Connect the bench sensor (optional):
Connect the cable for the bench sensor to the two Oven Sens. terminals.
3 Connect the multisensor (optional):
a) Plug the white cable on the left (A) into Multi Sens..
a) Plug the green cable on the right (B) into Multi Sens..
a) Plug the brown cable on the left (C) into Bench Sens..
STB
Multi Sens. Bench Sens. Oven Sens.
S-BUS
WS
BL
STB
Multi Sens. Bench Sens. Oven Sens.
S-BUS
WS
BL
STB
Multi Sens. Bench Sens. Oven Sens.
S-BUS
WS
BL

EOS 94 00 Series Specifications

General

Brand	EOS
Model	94 00 Series
Category	Control Unit
Language	English