Section 9: Standard & Optional Machine
Features
148
For objects with a smaller middle section – expand artwork:
Drive Wheel Side
Diameter = 3.5” (89 mm)
Middle Section
Diameter = 2.7” ( 68.6 mm)
Epilog
Laser
Ep ilog
Laser
Epilog
Laser
Normally, you would set up your artwork
something like the top image.
After expanding the artwork it appears like
the bottom image. We’re now ready to print.
(The grey outline of the glass is for reference
purposes to show how the glass will be
mounted on the rotary and would not be part
of the printed artwork.
Divide the drive wheel side by the
middle diameter and multiply by 100
to calculate the percentage of
adjustment. For our example the
calculation is:
=
1.296
3.5”
2.7”
x 100 = 129.6%
Because our calculation percentage
is greater than 100, we need to
expand the artwork to 129.6% of its
original size.
To Next Page
Loading...