Epson 2000 - Initialization Methods; Safety Approvals

Product Specifications
B-11
R4C428_V2
long.bk Rev_C
A5 size SPEC.FM
1/14/00 Pass 2
R
Proof Sign-off:
tantoname _______
leadername _______
editorname _______
Initialization Methods
The scanner can be initialized (returned to a fixed set of
conditions) in the following ways:
Safety Approvals
Safety standards:
Hardware initialization: This scanner is initialized when turning the Stylus
Scan power on. When scanner is initialized, the
following actions are performed.
a) Initializes scanner mechanism.
b) Clears input/output data buffer.
C) Sets default values.
Software initialization: The ESC @ command also initializes the Stylus
Scan. When Stylus Scan is initialized, the following
actions are performed.
a) Clears input/output data buffer.
b) Sets default values.
Operator initialization: This scanner is recognized the INIT (negative
pulse) of parallel interface. When Stylus Scan is
initialized, the following actions are performed.
a) Clears input/output data buffer.
b) Sets default values.
U.S. model UL 1950 with D3
CSA C22.2 No.950
European model EN60950 (VDE)