4-30
Using the Printer Software
R4C4620
Rev. C
A5 size SOFTWARE.FM
6/14/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Using the EPSON Remote! Utility
The EPSON Remote! utility allows you to easily change the
printer’s default settings from your computer’s DOS prompt.
Installing EPSON Remote!
Follow the steps below to install EPSON Remote!
1. Insert the printer software CD-ROM in a disk drive.
2. At the DOS prompt, type
D:\SETUP. (
If you inserted the disk
in a drive other than drive D, substitute the appropriate
letter.
)
Then press
Enter
.
3. Select your printer’s name in the Printer Model window and
press
Enter
.
C:\EPUTIL
appears as the default directory.
4. Press
Enter
again. The EPSON Remote! utility is copied to the
C:\EPUTIL directory.
Accessing EPSON Remote!
To access EPSON Remote!, type
C:\PRNSET
at the DOS prompt
and press
Enter
. Then follow the on-screen instructions to use this
utility. You can also access EPSON Remote! by typing
C:\PANEL
at the DOS prompt and pressing
Enter
. The PRNSET and PANEL
access methods differ slightly. The PANEL method opens a
condensed version of EPSON Remote! that only provides the
most often used settings.
To Next Page
Loading...
