Epson 24-Pin - Printer Specifications; Mechanical

C-2
Specifications
R4C4620
Rev. C
A5 size SPEC.FM
6/14/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Printer Specifications
Mechanical
Printing method: 24-pin impact dot matrix
Printing speed: High-speed draft 400 cps at 10 cpi
Draft 300 cps at 10 cpi
360 cps at 12 cpi
450 cps at 15 cpi
Draft condensed 257 cps at 17 cpi
300 cps at 20 cpi
LQ 100 cps at 10 cpi
120 cps at 12 cpi
150 cps at 15 cpi
LQ condensed 171 cps at 17 cpi
200 cps at 20 cpi
Printing direction: Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing: 1/6-inch or programmable in 1/360-inch
increments
Printable columns: 80 columns (at 10 cpi)
Resolution: 360
×
180 dpi maximum (letter quality)
360
×
360 dpi maximum (raster graphics)
Interfaces: One standard bidirectional, 8-bit, parallel
interface with IEEE 1284 nibble mode
support and one optional interface slot