1-4
Setting Up the Printer
R4C4620
Rev. C
A5 size SETUP.FM
6/14/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
❏
Avoid electrical outlets controlled by wall switches or
automatic timers. An interruption in power can erase
information in the memory of your printer or computer.
Also avoid outlets on the same circuit as large motors or other
appliances that can cause voltage fluctuations.
❏
Keep the entire computer system away from potential sources
of electromagnetic interference, such as loudspeakers or the
base units of cordless telephones.
❏
Use a grounded power outlet; do not use an adapter plug.
❏
Make sure the paper path is clear and unobstructed before
you print on continuous paper. (See the next section.)
If you plan to use a printer stand, follow these guidelines:
❏
Use a stand that supports at least 20 kg (44 lb).
❏
Never use a stand that tilts the printer. The printer should
always be kept level.
❏
Position your printer’s power cord and interface cable so they
do not interfere with paper feeding. If possible, secure the
cables to a leg of the printer stand.
Positioning the continuous paper supply
Before using continuous paper, make sure you line up your paper
supply with the tractor feeder so the paper feeds smoothly into
the printer, as shown below.
rear front bottom
To Next Page
Loading...
Need help?
General