C-20
Specifications
R4C4620
Rev. C
A5 size SPEC.FM
6/14/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Character Tables
You can select the character tables shown in this section using the
printer’s default-setting mode or with software commands.
Note:
❏
Most of the character tables are the same as the PC 437 table for hex
codes 00 through 7F; only the characters for hex codes 80 through
FF are shown for these tables.
❏
The character tables with an asterisk (*) after the table name are
available only in some countries.
PC 437 (US Standard Europe)
To Next Page
Loading...
