2-30
Printing on Continuous Paper
R4C4620
Rev. C
A5 size CONT.FM
6/14/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Switching to printing on continuous paper
To switch from printing on single sheets to printing on continuous
paper with the push tractor, follow these steps:
1. If a single sheet remains in the printer, press the
Load/Eject
button to eject it.
c
Caution:
Never use the knob to eject paper while the printer is on; this
may damage the printer or cause it to lose the top-of-form
position.
2. Make sure that the tractor is installed in the push position. To
install the tractor in the position, see “Reinstalling the tractor
in the push position” on page 2-13.
3. Load continuous paper onto the push tractor as described
earlier in this chapter.
The printer loads your continuous paper automatically when you
begin printing.
To Next Page
Loading...
Need help?
General