1-16
Setting Up the Printer
R4C4620
Rev. C
A5 size SETUP.FM
6/14/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Installing the Printer Software
After you connect the printer to your computer, you need to
install the software included on the EPSON printer software CD-
ROM shipped with your printer.
Your printer software includes:
❏
Printer driver
The printer driver is the software that runs, or “drives,” your
printer. With it, you can make printer settings such as print
quality, resolution, and paper size.
❏
EPSON Status Monitor 3 (Windows 95, 98, or NT 4.0 only)
The EPSON Status Monitor 3 notifies you of printer errors and
displays printer status information.
❏
EPSON Remote! (a DOS-based printer setup utility)
The EPSON Remote! utility allows you to easily change the
printer’s default settings from the computer screen. See
“Using the EPSON Remote! Utility” on page 4-30.
To install the printer software, see “Installing the printer software
in Windows 95, 98, or NT 4.0” or “Installing the printer software
in Windows 3.1 or NT 3.5x” in this section. If you are using DOS,
see “For DOS programs” on page 1-19.
Installing the printer software in Windows 95, 98, or NT 4.0
Follow the steps below to install the printer software in Windows
95, 98, or NT 4.0:
Note:
❏
Installing the printer software for Windows NT 4.0 may require
network administration privileges. Ask your administrator for more
information.
To Next Page
Loading...
Need help?
General