6
Getting to Know Your Printer
L
R4C4620
Rev. C
A5 size INTRO.FM
6/14/00 Pass 3
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Using the push and pull tractor in combination
You can improve paper feeding and reduce paper jams by using
two tractors at the same time. This is especially helpful for
printing on continuous preprinted forms or multipart forms and
for printing high-quality graphics.
Note:
For more information on how to use two tractors in the push and pull
combination, see “Using two tractors in the push/pull combination” on
page 2-22.
rear
You can also load continuous paper from the rear
pull tractor position.
Note:
Paper loaded from the rear slot results in a curved
paper path, which may affect loading
performance, so use the front or bottom slot
whenever possible.
Caution:
Do not load continuous paper with labels in the rear
slot; the labels may come off their backing sheet
inside the printer and cause a paper jam.
Combination Description
rear push
and pull
To use the push tractor with the pull tractor, you
need to purchase the optional pull tractor
(C80020
✻
) and install it in the pull position.
Caution:
Do not load continuous paper with labels onto the
push tractor even when it is used in combination
with the pull tractor. If you load continuous paper
with labels onto the rear push/pull tractor, the labels
may come off their backing sheet inside the printer
and cause a paper jam.
To Next Page
Loading...
