A
Enhancing Your Printer With Options
A-19
R4C4620
Rev. C
A5 size OPTIONS.FM
6/14/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Switching to single-sheet paper in the cut-sheet feeder
1. If any continuous paper remains in the printer, press the
Tear
Off/Bin
button to advance the paper to the tear-off position.
Then tear off the printed pages.
c
Caution:
Tear off any printed documents before pressing the
Load/Eject
button in the next step. Reverse feeding several pages at a time
may cause a paper jam.
2. Press the
Load/Eject
button. The printer feeds the paper
backward to the standby position. The paper is still attached
to the push tractor but is no longer in the paper path.
3. Move the printer’s paper release lever to the single-sheet
position. Also set the paper thickness lever to the proper
position for the thickness of your single-sheet paper.
4. If you are using the double-bin cut-sheet feeder, select the bin
you want to use as described on “Selecting your paper path
(bin 1 or bin 2)” on page A-17.
To Next Page
Loading...
Need help?
General