Epson 24-Pin User Manual

2
Printing on Continuous Paper
2-5
R4C4620
Rev. C
A5 size CONT.FM
6/14/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Use the following table to set the paper thickness lever to match
the thickness of your paper.
* See Appendix C for complete paper specifications.
** Continuous paper with labels cannot be used with the push tractor. To use
them, install the tractor unit in the pull position.
Note:
❏
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
❏
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print quality.
Paper type* Lever position
Ordinary (single sheets or continuous paper) -1 or 0
Carbonless multipart forms with:
2 parts (original + 1 copy)
3 parts (original + 2 copies)
4 parts (original + 3 copies)
5 parts (original + 4 copies)
1
2
3
5
Continuous paper with labels** 2
Postcard 2
Envelopes 2 to 6

Epson 24-Pin Specifications

General

Brand	Epson
Model	24-Pin
Category	Printer
Language	English