2
Printing on Continuous Paper
2-7
R4C4620
Rev. C
A5 size CONT.FM
6/14/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
To load paper onto the push tractor, follow these steps:
1. Make sure the printer is turned off.
2. Open the paper guide cover and remove the paper guide by
holding both edges and lifting it up.
3. Set the paper release lever to the push tractor position. Set the
paper thickness lever (located under the printer cover) to the
proper position for your paper’s thickness.
To Next Page
Loading...
