Epson 890N - FX B/W Dot-matrix Printer User Manual

EPSON FX-890/2190 Revision B
PRODUCT DESCRIPTIONS Features 16
Note1: Roll paper must be set on the roll paper holder (option).
2: Roll paper should be inserted from rear entrance only.
3: Release lever position should be friction.
TYPEFACE

Bit map font
 EPSON Draft : 10 cpi, 12 cpi, 15 cpi
 EPSON Roman : 10 cpi, 12 cpi, 15 cpi, Proportional
 EPSON Sans Serif : 10 cpi, 12 cpi, 15 cpi, Proportional
 EPSON OCR-B : 10 cpi *
 Bar code fonts:
EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128,
POSTNET, Coda bar (NW-7)*, Industrial 2 of 5*, Matrix 2 of 5*
NOTE: “*”: These fonts are not described in user’s manual.
CHARACTER TABLES
Standard version : 13 tables
NLSP version : 42 tables
International character sets : 13 countries
INPUT BUFFER
128 Kbyte
Table 1-15. Roll Paper
FX-890&
FX-2190
Bottom/Front Entry Rear Entry
Minimum Maximum Minimum Maximum
Width
(inch)
(mm)
----- (8.5)
216
Length
(inch)
(mm)
----- -----
Diameter
(inch)
(mm)
----- (5)
φ127 mm
Thickness
(inch)
(mm)
----- (0.0028)
0.07
(0.0035)
0.09
Weight
(g/m
2
)
(lb)
----- 52
(14)
82
(22)
Quality
-----
Plain paper, not curled, not
folded, not crumpled

Epson 890N - FX B/W Dot-matrix Printer Specifications

General

Brand	Epson
Model	890N - FX B/W Dot-matrix Printer
Category	Printer
Language	English