Epson 890N - FX B/W Dot-matrix Printer User Manual

EPSON FX-890/2190 Revision B
Disassembly and Assembly Main Components Disassembly 69
4.2 Main Components Disassembly
This section provides the disassembly procedures. The basic order for disassembly is shown in the flowchart below. The exploded diagrams are also provided in the “Exploded
Diagrams” (page 114). Refer to them to see how components are engaged with each other if necessary.
Figure 4-1. Disassembly Flowchart
Pre-disassembly Procedures (p.70)
Upper Housing (p.72)
C524MAIN Board (p.74) C524PSB/PSE/PSH Board (p.76)
START
CR Motor (p.81)
Release Detector (p.86)
Printer Mechanism Disassembly (p.77)
Printhead (p.77) HP (Home Position) Detector (p.78) Platen (p.79)
Carriage Assembly (p.88) Rear Paper Guide Assembly (p.90)
PF Gear Train (p.84)
PF Motor (p.83)
Ribbon Drive (RD) Assembly (p.92)
PG (Platen Gap) Detector (p.86)
Printer Mechanism (p.80)
Rear PE Detector (p.87)Front PE (Paper End) Detector (p.87)
Main Components Disassembly

Epson 890N - FX B/W Dot-matrix Printer Specifications

General

Brand	Epson
Model	890N - FX B/W Dot-matrix Printer
Category	Printer
Language	English