Epson AcuLaser C2900N - Page 177

1 - 164
Chapter 1 Troubleshooting
Epson AcuLaser C2900N
Revision B
Confidential
9
Checking the paper path.
Are there any foreign substances on the paper path?
Remove the
foreign
substances, then
go to step 10.
Go to step 11.
10 Is the image printed correctly? End of work. Go to step 11.
11
Checking after resetting the HOLDER ASSY RETARD.
Reseat the HOLDER ASSY RETARD.
Is the image printed correctly?
End of work. Go to step 12.
12
Checking after replacing the HOLDER ASSY RETARD.
Replace the HOLDER ASSY RETARD. (Refer to RRP2.2.)
Is the image printed correctly?
End of work. Go to step 13.
13
Checking after resetting the ROLL ASSY FEED.
Reseat the ROLL ASSY FEED.
Is the image printed correctly?
End of work.
Replace the ROLL
ASSY FEED.
(Refer to RRP3.5.)
Step Check
Remedy
Yes No