Epson AcuLaser C2900N - Page 178

1 - 165
Chapter 1 Troubleshooting
Epson AcuLaser C2900N
Revision B
Confidential
FIP-1.P17 The top margin is incorrect / The side margin is incorrect
ESS and possible causative parts
- DRUM CARTRIDGE (PL4.1.21)
- TRANSFER ASSY (PL6.1.7)
- ROS ASSY (PL4.1.1)
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step Check
Remedy
Yes No
1
Checking the printing.
Checked by [Test Print] - [Gradation] in diagnosis.
Is the image printed correctly?
Printing data is
incorrect, then
check the printing
data which the
problem
generated.
Go to step 2.
2
Checking after replacing the DRUM CARTRIDGE.
Replace the DRUM CARTRIDGE. (Refer to RRP4.6.)
Does the error appear on the printed material when
printing?
Go to step 3. End of work.
3
Checking after replacing the TRANSFER ASSY.
Replace the TRANSFER ASSY. (Refer to RRP6.3.)
Does the error appear on the printed material when
printing?
Go to step 4.
Replace the ROS
ASSY. (Refer to
RRP4.1.)
Mnt05100KA
Mnt05101KA