Epson AcuLaser C2900N - Page 230

2 - 26
Chapter 2 Operation of Diagnostic
Epson AcuLaser C2900N
Revision B
Confidential
Exit Motor
(DO-d/e/f/10)
1) Power on the printer, and enter the Diag Mode.
2) Execute DO-d.
3) Check that the Exit Roll rotates.
4) Press the "STOP" key to stop the test.
Duplex Motor
(DO-12/13/14/15)
NOTE: This procedure is for the technical staff.
When performing operation for five minutes or longer with the front
cover open, remove the drum cartridge, and cover the drum to avoid
exposure to light.
1) Power on the printer, and enter the Diag Mode.
2) Open the Front Cover and CHUTE DUP IN.
3) Cheat the Safety Interlock System.
4) Execute DO-12.
5) Check that the Duplex Roller rotates.
6) Press the "STOP" key to stop the test.
7) Remove the cheater.
8) Close the CHUTE DUP IN and Front Cover.
Motor/Clutch/Solenoid Name
(Diag. Code)
Check procedure
Exit Roll
MiS2014SA
CHUTE DUP IN
Duplex Roll
MiS02015SA