3 - 3
Chapter 3 Removal and Replacement Procedures
Epson AcuLaser C2900N
Revision B
Confidential
- Wear a wristband or the like as far as possible to remove static electricity of the human body.
- Keep the front cover closed. Buzzer goes off when the machine is left powered on with the front
cover open for five minutes or longer to prevent the drum deterioration due to exposure to light.
- When opening the front door in a removal/replacement operation, cover the drum to keep it from
being exposed to light.
- Remove CASSETTE ASSY 250, DRUM CARTRIDGE, TONER CARTRIDGE and FUSER UNIT,
and put them in a place where they do not affect the procedure. (Note that the service procedures
can be performed with those parts in place depending on the target section of removal/replacement.)
To Next Page
Loading...
