Epson AcuLaser C2900N - Page 259

Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 5 Confidential
RRP1. COVERS
RRP1.1 COVER ASSY TOP (PL1.1.1)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
3) Open the TRANSFER ASSY (PL6.1.7).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
4) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
5) Remove the FUSER UNIT. (RRP6.1)
6) Remove the COVER CST. (RRP1.4)
7) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
8) Remove the COVER SIDE R. (RRP1.5)
9) Remove the COVER SIDE L. (RRP1.7)
10) Remove the COVER REAR. (RRP1.3)
11) Remove the two screws (silver, tap,
8mm) that fix the COVER ASSY TOP
(PL1.1.1) to the printer.
12) Remove the COVER ASSY TOP from
the printer.
11)
11)
12)