1 - 19
Chapter 1 Troubleshooting
Epson AcuLaser C2900N
Revision B
Confidential
091
402
Ready to Print
ImagingUnit Life
Ready to Print
Replace Soon
<IOT PHD Life Pre Warning>
The drum cartridge is approaching the replacement time.
FIP-1.48
912
Check Unit
Imaging Unit
<PHD Tape Staying>
Detect the tape staying on the drum cartridge.
FIP-1.49
916
I U CRUM Error
Restart Printer
Error 091-916
Restart Printer
<IOT PHD CRUM ID Error>
An unsupported drum cartridge is detected.
FIP-1.50
935
Replace
Imaging Unit
<IOT PHD Life Over>
The drum cartridge has reached the replacement time.
FIP-1.51
941
Waste Full
Yellow Cartridge
<IOT CRU Waste (Y) Full>
Waste Toner (Y) Counter value has reached replacement
time.
FIP-1.52
942
Waste Full
MagentaCartridge
<IOT CRU Waste (M) Full>
Waste Toner (M) Counter value has reached replacement
time.
FIP-1.52
943
Waste Full
Cyan Cartridge
<IOT CRU Waste (C) Full>
Waste Toner (C) Counter value has reached replacement
time.
FIP-1.52
944
Waste Full
Black Cartridge
<IOT CRU Waste (K) Full>
Waste Toner (K) Counter value has reached replacement
time.
FIP-1.52
972
Insert
Imaging Unit
<IOT PHD Detached>
The drum cartridge is not installed in the printer.
FIP-1.53
092
310
CTD Sensor Error
Restart Printer
Error 092-310
Restart Printer
<IOT CTD(ACD) Sensor Error>
CTD(ACD) sensor error (analog to digital conversion etc.) is
detected.
FIP-1.54
410
Ready to Print
CTD Sensor
<CTD (ADC) Sensor Dustiness Warning>
The CTD (ADC) Sensor is approaching the Cleaning time.
FIP-1.55
661
Env Sensor Error
Restart Printer
Error 092-661
Restart Printer
<IOT Environment Sensor Error>
The Temperature sensor detected the temperature anomaly.
FIP-1.56
910
Check Unit
CTD Sensor
<IOT CTD (ADC) Sensor Dustiness>
The CTD (ADC) Sensor has reached the Cleaning time.
FIP-1.55
093 423
Ready to Print
Yellow Low
Ready to Print
Replace Soon
<IOT Toner Cartridge (Y) Near Life>
The Toner Cartridge (Y) is approaching the replacement time.
When all the toner cartridges are simultaneously approaching
the replacement time, a warning is indicated on the LCD panel
in the following order: 1)Black → 2)Cyan → 3)Magenta →
4)Yellow
FIP-1.57
Status
Code
Error Message
Status Contents
FIP to be
referred
LCD
To Next Page
Loading...
