Epson AcuLaser CX16 Reference Guide

IPP
The Network - IPP window allows you to configure the following items. For details on IPP, refer to
“Network Connection” on page 42. In order to apply the settings, the machine must be turned off, then
on again after the setting is specified.
Item Description
Enable IPP Selects whether or not IPP is used.
Choices On, Off
Default On
Note:
When “HTTP” is set to “Disable”, “Enable IPP” will automatically be set
to “Off” (the “Enable IPP” check box will be cleared).
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IPP
Printer Name Specifies the printer’s name.
Range Up to 127 characters
Default EPSON_IPP_Printer-xxxxxx
Note:
“xxxxxx” refers to the last six digits of the MAC address (in hexadec-
imal).
Printer Location Specifies the printer’s location.
Range Up to 127 characters
Printer Information Specifies the printer information.
Range Up to 127 characters
More Printer Information Specifies printer information that is more detailed than the informa-
tion entered in the “Printer Information” box.
Range Up to 127 characters
Printer Driver Installer Specifies the version information for the printer driver installer.
Range Up to 127 characters
Printer Make and Model Specifies the printer model information.
Range Up to 127 characters
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 101

Epson AcuLaser CX16 Specifications

General

Brand	Epson
Model	AcuLaser CX16
Category	All in One Printer
Language	English