Item Description
Speed Dial List Click to jump to the beginning of the speed dial list within the same page.
Speed Dial number of 001 to 220 are Fax and E-mail destinations.
Speed Dial number of 221 to 250 are FTP and SMB destinations.
No. Displays the number in the speed dial list. Click a speed dial number where no
destination is registered to add a destination from the Speed Dial Registration page.
If a destination is already registered with the speed dial number that is clicked, the
registered information can be edited.
When registering a fax, e-mail and LDAP Search, refer to “Speed Dial Registration” on
page 74.
When registering an FTP or SMB destination, refer to “Speed Dial Registration (Scan to
Server)” on page 76.
Name Displays the destination name of the speed dial number.
Address Displays the destination information (fax number, e-mail address, FTP address or SMB
address) registered with the speed dial number.
Batch Displays the batch transmission time for speed dial number.
Delete button Deletes the selected destination from the speed dial.
Speed Dial Registration
The Scan - Speed Dial Setting - Speed Dial Registration window, select the type of Speed dial
destination to be added.
Item Description
Speed Dial Registration From the drop-down list, select the type of speed dial destination to be added.
If “Fax” is selected, the Fax Destination page will be displayed. For details, refer to “Fax
Destination” on page 75.
If “E-mail” is selected, the E-mail Destination page will be displayed. For details, refer to
“E-mail Destination” on page 75.
If “LDAP Search” is selected, the LDAP Search page will be displayed. For details, refer to
“LDAP Search” on page 76.
Choices Fax, E-mail, LDAP Search
Default Fax
Note:
If “LDAP” in the Network - LDAP page is set to “Enable” and “Server Address” is not set to
“0.0.0.0”, “LDAP Search” appears.
Apply button Displays the page for the type of speed dial destination selected from the list.
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 74
To Next Page
Loading...
Need help?
General
