Epson Artison 800 - Page 183

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Disassembly Procedures 184
Confidential
3. Remove the E-ring.
4. Remove the torsion spring from the ADF PF Roller, and remove the ADF PF
Roller from the ADF Frame Unit in the direction of the arrow.
Figure 4-202. Removing the ADF PF Roller (3)
When installing the ADF PF Roller, attach the leg of the torsion
spring on the ADF PF Roller as shown in
Fig. 4-202.
A D J U S T M E N T
R E Q U I R E D
After replacing or removing the ADF PF Roller, be sure to perform
the required lubrication. (See
Chapter 6 "MAINTENANCE" .)
ADF PF Roller
E-ring
Torsion spring
http://www.manuals4you.com