59
Publishing Discs
For PP-50
Standard mode: When you want to publish up to 50 identical discs at once
This mode uses Stacker 1 as the input stacker for discs. You can select Stacker 2 or Stacker 3 as the output stacker.
If you select Stacker 2 as the output stacker, you can publish up to 50 discs without having to replenish the discs or
take out published discs.
Repeatedly replenishing and taking out discs allows for the continuous publishing of up to 1,000 discs.
When you select Stacker 2 as the output stacker
When you select stacker 3 as the output stacker
Low-volume mode:
When you want to publish two type of discs without having to change discs
This mode uses Stacker 1 and Stacker 2 as the input stackers for discs. Published discs are output to Stacker 3.
If, for example, CD-Rs are loaded in Stacker 1 and DVD-Rs are loaded in Stacker 2, you can just select a stacker as
necessary to publish the required discs without having to change the discs.
1
2
1
2
To Next Page
Loading...
Need help?
General
