30
Performing an operation from a PC
1
Log in to EPSON Total Disc Net Administrator.
See “Logging in to EPSON Total Disc Net Administrator” in the PP-100N User’s Guide for the login procedure.
2
Click the [Network] tab in the [System settings] screen.
3
Either manually enter the IP address, DNS server setup method, and host and domain
name setup method, or set them to [Auto], and click [Save].
• The network settings first become able to be set using a PC when an administrator is
registered after the network settings have been set using the control panel. See page
32 in this guide for the procedure for registering an administrator.
• The link speed and Jumbo Frame cannot be set using a PC. Use this product’s control
panel (“Top menu” – “Network” – “Change settings” – “Link speed/JUMBO FRAME”).
Note
To Next Page
Loading...
