56
Batch registering users
Use the following procedure to perform a batch registration of multiple users.
1
Create a CSV format file containing the information of the following items.
• (1) User name: The user name to use for logging in to EPSON Total Disc Net Administrator.
• (2) Password: The password to use for logging in to EPSON Total Disc Net Administrator.
The screens shown here are from Windows XP.
2
Log in to EPSON Total Disc Net Administrator.
See “Logging in to EPSON Total Disc Net Administrator” in the PP-100N User’s Guide for the login procedure.
• It is not possible to assign administrator authority when performing a batch registration
of multiple users. To set authority, change the information of each user after performing
a batch registration. (See “Changing user information” on page 58 in this guide.)
• You can register up to 100 users including the number of users for which user
information is already registered.
• Enter 5 to 16 alphanumeric characters for the user name.
• Enter 5 to 16 alphanumeric characters or symbols (“.”, “ -”, “_”) for the password.
• The password is case-sensitive.
• Do not set a date of birth, employee number, or anything else that is easy to guess for
the password.
• Manage the password so that it cannot be used by anyone other than the user.
Enter a full name and email address if necessary. An email address needs to be entered if
notification email transmission is set. See “Notification email transmission settings” on page
37 in this guide for details on the notification email transmission settings.
(1) (2) Full name Mail address
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
