212
Setting Options Description
Connect ELPCB02
(EB-760W/EB-770F)
On
Off
Set to On to switch the input source
between the HDMI2 port and HDMI3
port each time you press the HDMI2
button on the optional interface box
Remote Receiver Front/Rear
Front
Rear
Off
Limits reception of remote control
signals by the selected receiver; Off
turns off all receivers
Projector ID (EB-760W) Off
1 through 9
Assigns an ID for the projector when
you use multiple projectors
Screen Type 4:3
16:6 (EB-770F/EB-775F)
16:9
16:10
21:9 (EB-770F/EB-775F)
Sets the aspect ratio to fit the image
on the projection surface. This
setting is not available when using
the USB or LAN input source, or
when in Content Playback mode
(EB-770F/EB-775F)
Screen Position Varying positions available Shifts the image position on the
screen (only available if the Screen
Type setting is not set to the same
aspect ratio as the projector's native
resolution)
High Altitude Mode On
Off
Regulates the projector's operating
temperature at altitudes above 4921
feet (1500 m)
Reset Installation Settings — Resets all settings on the Installation
menu to their default values except
for the following:
• Digital Zoom
• Image Shift
Parent topic: Adjusting the Menu Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
