253
4. Replace the battery cover and press it down until it clicks into place.
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Maintaining and Transporting the Projector
Updating the Firmware
You can update the projector's firmware using a USB storage device or a computer and a USB cable.
Note: Your computer must be running one of the following operating systems to update the firmware:
• Windows 8.x or later
• macOS 10.13.x or later
If a firmware update is available for your product, you can select the Firmware Update option in the
projector's Initial/All Settings menu. The projector enters firmware update mode and is ready to perform
a firmware update. If a firmware update file is not found, the projector enters standby mode.
If your projector is on a network, you can use the Epson Projector Management software to check for
and update your product's firmware.
You can also contact Epson Support to check for firmware updates for your product. For more
information, contact Epson support.
Parent topic: Maintaining and Transporting the Projector
To Next Page
Loading...
Need help?
General
Weight and Dimensions
