66
7. Do one of the following according to the security you selected:
• WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press Enter, and enter a passphrase
from 8 to 63 characters long. Then continue with step 9.
• WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press Enter.
8. Select the protocol for authentication as the EAP Type setting.
9. When you are finished, select Return and press Enter to return to the Network Settings menu.
10. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Parent topic: Wireless Network Projection
Related tasks
Registering Digital Certificates from a Web Browser
Installing the Additional Wireless LAN Module
To use the additional wireless connections, install the optional Epson 802.11b/g/n wireless module in the
projector. Your projector has a built-in wireless LAN module. If you install an optional Epson 802.11b/g/n
wireless LAN module, you can use both network connection methods at the same time. When you install
the wireless LAN module, set the Simple AP setting to On. Do not install any other type of wireless
module.
Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting
wirelessly. You may damage the module or lose data.
Note: The wireless LAN module is not included with your projector.
1. Turn off the projector and unplug the power cord.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
