EasyManuals Logo

Epson EB-770F User Manual

Epson EB-770F
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #269 background imageLoading...
Page #269 background image
269
If you want to use a connected audio source when the projector isn't projecting any images, set the
Quick Startup option in the Operation menu to Off and make sure the A/V Output setting in the
Signal I/O menu is set to Always On.
If the volume for the computer is set to the minimum while the projector's volume is set to maximum,
the sound level may be mixed. Turn up the computer's volume and decrease the projector's volume
(when using Epson iProjection [Windows/Mac] or USB Display).
Make sure the Audio Output Device option is set to the correct audio port for your video device.
Check the Mic Input Level setting (EB-760W/EB-770F) and lower it, if necessary.
If you turn the projector on immediately after turning it off, the cooling fans may run at high speed
momentarily and cause an unexpected noise. This is normal.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal I/O Menu
Solutions to Microphone Problems
Related tasks
Connecting to a Video Source for Sound
Connecting to External Speakers
Controlling the Volume with the Volume Buttons
Solutions to Microphone Problems
If there is no sound when you use a microphone connected to the projector (EB-760W/EB-770F), try the
following solutions:
Make sure the microphone is securely connected to the projector.
Adjust the Mic Input Level setting in the Signal I/O menu. If the setting is too high, the sound of the
other connected devices will be too low.
Parent topic: Solving Image or Sound Problems
Solutions to Problems Using Content Playback
If you cannot play back a playlist correctly, try the following solutions (EB-770F/EB-775F):
Check the following on all projectors:
All projectors are the same model. If any of the projectors are a different model or have a different
resolution, synchronized playback may not be performed properly.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-770F and is the answer not in the manual?

Epson EB-770F Specifications

General IconGeneral
Number of colors1.07 billion colors
Native aspect ratio16:9
Projection technology3LCD
Contrast ratio (typical)2500000:1
Screen size compatibility57 - 150 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-3 - 3 °
FocusManual
Throw ratio0.25
Zoom capabilityYes
Fixed focal length3.7 mm
Light source typeLaser
Service life of light source- h
Product typeUltra short throw projector
Product colorWhite
Market positioningEducation
Cable lock slot typeKensington
Audio (L/R) in-
Composite video in0
Serial interface typeRS-232C
USB 2.0 ports quantity2
VGA (D-Sub) ports quantity3
RMS rated power16 W
Number of built-in speakers1
Analog signal format systemNot supported
Power sourceAC
Power consumption (standby)2 W
Power consumption (typical)263 W
Display diagonal0.62 \
Noise level37 dB
Noise level (economic mode)27 dB
Weight and Dimensions IconWeight and Dimensions
Depth395 mm
Width357 mm
Height165 mm
Weight5900 g

Related product manuals