30
Rear projection from a table or portable cart behind a translucent screen
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle.
If you place the projector vertically, turn on the Vertical Installation setting in the projector's Installation
menu.
If you install the projector to a fixed location, turn on the Fixed Installation setting in the projector's
Installation menu.
If you project from a table or portable cart, or from the rear, install the projector feet and be sure to select
the correct Projection option in the projector's menu system.
Parent topic: Projector Placement
Projection Distance
The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Refer to the tables in the online Installation Guide to determine approximately how far to place the
projector from the screen based on the size of the projected image. (Conversion figures may have been
rounded up or down.) You can also use the Projection Distance Calculator here (U.S.), here (Canada),
or here (Caribbean).
Parent topic: Projector Placement
To Next Page
Loading...
Need help?
General
Weight and Dimensions
